Мониторинг MSI K9N Ultra-2F nForce 570 используя lm_sensors
С системной платой MSI K9N Ultra-2F nForce 570 опять проблемы - сильно греется радиатор на мостах (невозможно удержать руку). Решил поставить lm_sensors для контроля температуры.
И поставил - apt-get install lm-sensors
Даже настроил, используя http://www.cyberciti.biz/faq/howto-linux-get-sensors-information/
Команда настройки sensors-detect, далее по шагам конфигуратора.
Данные о состоянии получаем командой sensors:
newstar:/tmp# sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +24.0°C
Core0 Temp: +13.0°C
Core1 Temp: +18.0°C
Core1 Temp: +7.0°C
w83627ehf-isa-0a10
Adapter: ISA adapter
VCore: +1.29 V (min = +0.00 V, max = +1.74 V)
in1: +12.14 V (min = +12.62 V, max = +13.31 V) ALARM
AVCC: +3.26 V (min = +4.08 V, max = +4.08 V) ALARM
3VCC: +3.26 V (min = +4.08 V, max = +3.06 V) ALARM
in4: +1.58 V (min = +1.59 V, max = +1.53 V) ALARM
in5: +1.46 V (min = +2.04 V, max = +2.01 V) ALARM
in6: +4.68 V (min = +6.53 V, max = +6.53 V) ALARM
VSB: +3.23 V (min = +3.06 V, max = +3.06 V) ALARM
VBAT: +2.98 V (min = +2.03 V, max = +3.06 V)
in9: +1.49 V (min = +1.02 V, max = +2.04 V)
Case Fan: 1757 RPM (min = 0 RPM, div = 128)
CPU Fan: 2343 RPM (min = 883 RPM, div = 8)
Aux Fan: 0 RPM (min = 811 RPM, div = 128) ALARM
fan5: 0 RPM (min = 0 RPM, div = 128)
Sys Temp: +39.0°C (high = -113.0°C, hyst = -1.0°C) ALARM sensor = thermistor
CPU Temp: +45.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUX Temp: +43.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +0.000 V
newstar:/tmp# незаконченное, lm_sensors, debian |